电流并联负反馈放大器实验的研究

用实验的方法，研究电流并联负反馈对放大器性能的改善，提出电流型、并联型负反馈放大器性能参数的测量方法。     

Linear and Nonlinear Optical Properties Of Racemic (±)2-(α-Methylbenzylamino)-5-Nitropyridine Single Crystals

Linear and nonlinear optical properties of racemic (±)2-(α-methylbenzylamino)-5-nitropyridine ((±)MBANP) single crystals have been comprehensively investigated and compared with those of the enantiomorph (–)2-(α-methylbenzylamino)-5-nitropyridine ((–)MBANP) crystals. (±)MBANP crystal exhibits very high chemical and physical stability, but relatively small nonlinear optical coefficients (d₃₁ = 6.8 pm/V, d₃₂ = 4.7 pm/V, d₃₃ = 0.84 pm/V). A comparison between the nonlinear optical coefficients of (±)MBANP and (–)MBANP demonstrates the validity of the oriented-gas model in molecular crystals that neglects all the contributions from intermolecular interaction.     

空间光通信指令传输的抗干扰设计

设计一种用归零码及多重相关解调技术的传输方案，并给了所需的几种抗干扰单元电路，最后结合实验说明了此方案可提高不良环境下传输数据的置信率。     

用多路逆磁系统测量热电子环磁镜中热电子沿轴向的分布

本文介绍了多路逆磁测量方法及利用这一方法在ＨＥＲ装置上测量热电子环沿轴向的长度与晃荡电子密度的轴向分布的实验结果。     

Multimode optical fiber demultiplexer-star coupler using a single gradient-index-rod lens and a multi-facet grating

An optical fiber multi-function device consisting of a single gradient-index-rod lens and a multi-facet blazed reflection grating is proposed to simultaneously realize functions of wavelength demultiplexing and optical signal distribution in a multimode optical fiber transmission system. We analyzed the demultiplexing characteristics and the tolerance of optical components using the ray trace method. This device can realize not only low loss optical signal distribution but also offers improved demultiplexing characteristics in comparison with the previously proposed demultiplexer-multiposition switch. The following characteristics are expected from the design using commercially available optical components: a working band of 0.64–0.88 μm, channel separation of 34–36 nm, 3 dB bandwidth of 27–28 nm, channel cross-talk of less than - 40 dB and minimum excess insertion loss of 0.9–2.1 dB.     

一种新型的二元光学器件——多位相光束分束器的制作

本文报道了用于多光束分束器的反射式16位相值二元光学器件的制作。该二元光学器件把一束光束分成5×5光束阵列。测量的衍射效率为76.16%,接近理论设计值79.68%。该二元光学器件的有效孔径为10mm×10mm。     

基于光子数目比较的激光测距法

提出了一种新颖的激光测距方法。该方法避开了传统激光测距法中使用复杂辅助电子设备对脉冲计时或比较相位差的过程,而主要通过光学手段分析和提取待测距离信息,最终通过比较大量光子数目的方法求得待测距离。并利用单轴晶体的双折射和全内双反射性质,用特殊结构的单块LiNbO3晶体设计了实施该方法的主体装置。结果表明,该激光测距法同目前普遍使用的激光测距法相比,不但简化了结构,而且有很高的测距精度,从而为激光测距开拓了一种新的思路。     

Finite element modal solutions of planar photonic crystal fibers with rectangular air-holes

Modal solutions of planar photonic crystal waveguides with rectangular air-holes are presented by using a rigorous full-vectorial finite element-based approach. The effective indices, mode field profiles, spot-sizes, power confinements, modal hybridness, beat lengths and group velocity dispersions are shown for the fundamental and higher order modes of the quasi-TE and TM polarizations.     

Performance evaluation of fiber Bragg grating sensors by digital holographic technique, strain gauge measurement

In view of the growing interest for non-destructive tests of materials, geodynamical monitoring and in general remote sensing, there is a great effort to bring practical optical sensors from research labs to industrial and environmental applications. In this paper, we employ digital holographic technique as an efficient tool for evaluating the strain measurement capability of fiber Bragg gratings (FBG). A cantilever beam has been employed as a test structure under loading test. The strain measurements results obtained by fiber-based sensors have been compared to those obtained by using full-field digital holographic technique and point-wise strain gauge sensors glued on the same cantilever beam. A simple theoretical model is also presented to interpret and compare the experimental results coming from different techniques.     

量子测量对三维光子晶体中Λ型原子动力学性质的影响

讨论了量子测量对各向异性光子晶体中Λ型激发态原子衰减的影响，主要包括衰减的抑制和加速效应.研究发现，这样的量子测量效应不仅与原子共振频率相对于光子晶体带边的位置有关，还与量子测量本身的频率大小相关.由于各向异性光子晶体的影响，较小频率的量子测量也能得到抑制衰减的效应. 关键词： 量子测量 量子Zeno 和 反Zeno效应 光子晶体